Formulate and deploy equipment improvement road maps in partnership with the process engineering team. Support new product introductions by ensuring equipment readiness and scalability. Proactively support the process improvement initiatives including process capability, yield and quality.
Start as a Quality Engineer (m/f/d) for the Central Manufacturing Engineering department (cross‑program and new development). Your Responsibilities: Support the resolution of complex quality issues and continuous improvement projects by defining measurement standards and identifying/facilitating improvements to increase: Process performance and product adherence to standards Reliability of dedicated processes Repeatability of processes during the initial design phase, prior to any process changes, and continuously throughout the product lifecycle Support Quality focal points for new development projects Support APQP deployment within the Quality scope Facilitate PFMEA (Process Failure Mode and Effects Analysis) Support the development of quality solutions/technologies within new development initiatives together with subject‑matter experts Support quality stream meetings and coordinate activities between sites and organizations Process Quality Management: Ensure consistent application of process management guidelines in line with the EN9100 standard Ensure the process referential (competences, resource models, documentation plan, process networks, deployment areas) is up to date, managed, and continuously improved Proactively support the Process Management Teams in managing the process referential and improving process maturity Ensure that any process change is properly addressed by checking the consistency of the changes and their impacts Collaborate with local and central Process Management Teams to improve Airbus Business Process Management Ensure implementation and effectiveness of process adherence by monitoring progress and collecting adherence results Ensure the quality of process deliverables and surveillance plans, and review process resources, performance indicators, compliance results, etc.
Werden Sie Teil unseres Teams als Manufacturing Engineering Technical Shopfloor Support (d/f/m) bei unserem Kunden in Hamburg-Finkenwerder. Ihre Aufgaben: Wiederkehrende technische Probleme erkennen, analysieren und lösen Optimierung der Arbeitsergebnisse durch Planung, Produktionssteuerung und Prozessgestaltung Erreichen der Bereichsziele und kontinuierliche Prozessverbesserung Nichtkonformitäten in der Produktion bzgl.
Werden Sie Teil unseres Teams als Manufacturing Engineering Technical Shopfloor Support (d/f/m) bei unserem Kunden in Hamburg-Finkenwerder. Ihre Aufgaben: Wiederkehrende technische Probleme erkennen, analysieren und lösen Optimierung der Arbeitsergebnisse durch Planung, Produktionssteuerung und Prozessgestaltung Erreichen der Bereichsziele und kontinuierliche Prozessverbesserung Nichtkonformitäten in der Produktion bzgl.
Änderungen einsteuern und begleitenBearbeitung der Manufacturing Bill of MaterialsVisualisierung der Arbeitsschritte per CADShop-Floor-Support, um Prozess-Fähigkeiten zu erlangenDurchführung von Soll-/Ist-Analysen der ProzesszeitenOptimierung der Prozesse und AbläufeEinführung und Umsetzung von Änderungen aus dem Engineering und der IntegrationTermingerechte Abarbeitung von QualitätsmeldungenEnge Abstimmung mit den Schnittstellen und Fachbereichen Ihr Profil: Erfolgreich abgeschlossenes Studium als Maschinenbauingenieur oder Studium im Bereich der ProduktionsplanungMindestens 3 Jahre Berufserfahrung in der Produktionsplanung oder einer ähnlichen PositionVerhandlungssichere Deutsch- und EnglischkenntnisseFortgeschrittene Kenntnisse in SAP R3 und TeamCenterErfahrungen im Umgang mit CATIA Was wir Ihnen bieten: Einen festen Arbeitsvertrag nach BAP-TarifvertragEine übertarifliche Vergütung zzgl.
Werden Sie Teil unseres Teams als Quality Manufacturing Engineer (m/w/d) bei unserem Kunden in Donauwörth. Ihre Aufgaben: Umsetzen von APQP-Elementen (Control Plan, Support P-FMEA, SPC) in Zusammenarbeit mit Stakeholdern Vertreten des Quality-Bereichs im Projekt und Planen von Qualitätsaktivitäten Planen, Koordinieren und Durchführen von FAI-Aufgaben (Kick-off, Action Follow-Up) Erstellen und Verfolgen von Prüfplänen und komplexen Prüfanweisungen Agieren als Schnittstelle zwischen Manufacturing Engineering und Design Engineering Unterstützen und Freigeben von Arbeitsplänen und SOIs Teilnehmen an MFT-Runden und Vertreten der Qualitätsbelange Ihr Profil: Abgeschlossenes Studium in Ingenieurwesen, Technischem Studium, Verbundwerkstoffen/Composites oder Qualitätsmanagement (mind.
We maintain close relationships with customers across all industries and therefore can provide engineering specialists with exciting projects and attractive job opportunities, drawing on your personal interests and experience. As your professional companion, we support you throughout the entire process, from the first contact to the first day on your new job – all this completely free of charge.
Successful studies in Engineering, Business Administration or Life Sciences (MS/MBA/BS/BA or equivalent) Solid experience in managing major capital projects in the pharmaceutical industry Functional knowledge of cGMPs and manufacturing operations in FDA regulated facility Excellent understanding of project management principles and project lifecycle phases, including knowledge of Validation, CMC and facility regulatory submission requirements Experience to manage high level project budgets Ability to handle many tasks simultaneously and integrate project planning efforts across functions Ability to understand the big picture and approach problem solving in a proactive team manner German knowledge is mandatory Varied work in a renowned company Pleasant working atmosphere Support throughout the entire application process Look forward to working in an international environment Ihr Kontakt Ansprechpartner Sandro Frei Referenznummer 865163/1 Kontakt aufnehmen E-Mail: sandro.frei@hays.ch Anstellungsart Freiberuflich für ein Projekt
About us Your Contribution Own and control project scopes, schedules and budgets; manage risks/issues and communicate status to stakeholdersLead cross functional execution with Production, Quality, Maintenance, Supply Chain, EHS, and Global EngineeringManage CAPEX, PO releases, FAT/SAT planning, cost tracking/forecasting and accurals; deliver fiscal year plan on time and on budgetPrepare and maintain audit ready documentation aligned to US cGMPOperate in accordance with standard cleanroom conduct consistent with ISO 14644 practices and internal QMS and site Contamination Control StrategyOwn change controls (local and global)- initiaiton, risk assessment, execution plan, verification of effectivensss and closure Lead/support validation and qualification for equipment, products, processes, etc.Integrate into operations; plan trials and downtime, coordinate line readiness/tech transfer, create/update SOPs, define PM requirements and maintenance plans, ensure spares/training are in placeSupport quality investigationsDrive continuous improvement with Lean to improve OEE, scrap rates, uptime and cycle times Mentor/train Engineers and Technicians (no direct reports); structured troubleshooting/problem solving and Best Known Methods; develop quick-reference guides/checklist, where needed Promote safety and EHS and adhere to all Company policies, procedures and guidelines Your Profile Bachelor's degree in Engineering (Mechanical, Electrical, Chemical, Industrial/Manufacturing, Pharmaceutical or Materials) or equivalent4+ years in regulated manfuacturing Project management and CAPEX executionSix Sigma Green/Black Belt and/or PMPValidation and QMS: URS, FMEA, VMP, IQ/OQ/PQ/PV; author/review protocols/reports, managing deviations/CAPA; change controls Working knowledge of cGMP, ISO 9001, ISO 15378Knowledge and experience in leading new equipment/NPI validationsLean/CI; 5S, Kaizen, DMAIC, root cause (5-why, fishbone)Tools: SAP, MS Project, MS TEAMS, Solidworks and MinitabStrong skills in MS Office Ability to read, write and speak EnglishTeam player with upbeat approach Your Benefits Excellent healthcare benefits including medical, dental and visionShort and long term disability Tuition reimbursement Paid time offPet insurance Other supplemental benefits available upon election Please feel free to contact usYour Profile Bachelor's degree in Engineering (Mechanical, Electrical, Chemical, Industrial/Manufacturing, Pharmaceutical or Materials) or equivalent4+ years in regulated manfuacturing Project management and CAPEX executionSix Sigma Green/Black Belt and/or PMPValidation and QMS: URS, FMEA, VMP, IQ/OQ/PQ/PV; author/review protocols/reports, managing deviations/CAPA; change controls Working knowledge of cGMP, ISO 9001, ISO 15378Knowledge and experience in leading new equipment/NPI validationsLean/CI; 5S, Kaizen, DMAIC, root cause (5-why, fishbone)Tools: SAP, MS Project, MS TEAMS, Solidworks and MinitabStrong skills in MS Office Ability to read, write and speak EnglishTeam player with upbeat approach
Principal Accountabilities Primary focus is on pre-sales technical support for IQVIAs Incentive Compensation solution built on the Orchestrated Analytics ecosystem which spans MDM, data warehousing, AI/ML, and data visualisation technology solutions.
Principal Accountabilities Primary focus is on pre-sales technical support for IQVIAs Orchestrated Analytics, in particular data warehousing and MDM technology solutionsDemonstrating innovative SaaS solutions that showcase how our current and prospective clients can achieve their business goals, through applying technology and analytics to transform disparate data sources into actionable insightsProvides technical knowledge, advice and support to customers, understanding their business requirements and technology stack, to maximize the benefits derived from IQVIAs products and/or servicesWorks with the sales teams during the sales process to maximize the benefits derived from the IQVIAs products and/or servicesProvides technical input for bid proposals, projects and technical documents within sales process, and should identify additional opportunitiesProvides pre-sale technical support in sales presentation and product presentations at customer sitesOwns Proof of Concepts based on customer requirements to demonstrate feasibility of the application, often requiring rapid prototyping and/or product demo for clientsVoice of the clients and sales back to Product and Engineering teams to ensure feedback is captured and initiatives are executed Desired Skills and Attributes Demonstrated work ethic and capability to be self-starterDemonstrated experience working with top tier clients in understanding their businesses and crafting technical solutionsTechnical experience, especially with leading MDM, Data Warehousing, ETL tools and IPaaS platformsA good understanding of CRM and marketing automation domains and proven experience with Salesforce platforms would be of additional benefitOutstanding communication skills, particularly in conveying technical concepts in a manner that is easy for clients and non-technical partners to understandExcellent quantitative skills and comfort with data exploration toolsDemonstrated experience in owning projects end to end that involves coordinating many resources and teamsExcellent organizational skills and attention to detailExcellent troubleshooting, analytical and problem-solving abilities with a tenacious commitment to finding the root cause of issuesAbility to work under intense pressure and multitask in a fast-paced start-up environmentAbility to energize and lead a team of partner engineers Our ideal candidate will have: Typically requires a minimum of 3 years of related experience with a Bachelor’s degree At IQVIA, we believe in pushing the boundaries of human science and data science to make the biggest impact possible – to help our customers create a healthier world.
Principal Accountabilities Primary focus is on pre-sales technical support for IQVIAs Technologies Orchestrated Customer Engagement. Though secondary support could include Orchestrated Analytics, Quality Management Systems (SmartSolve), and Commercial Compliance offeringsDemonstrating innovative, SaaS solutions that showcase how our current and prospective clients can achieve their business goalsProvides technical knowledge, advice and support to customers, understanding their business requirements and technology stack, to maximize the benefits derived from IQVIAs products and/or servicesWorks with the sales teams during the sales process to maximize the benefits derived from the IQVIAs products and/or servicesProvides technical input for bid proposals, projects and technical documents within sales process, and should identify additional opportunitiesProvides pre-sale technical support in sales presentation and product presentations at customer sitesOwns Proof of Concepts based on customer requirements to demonstrate feasibility of the application, often requiring rapid prototyping and/or product demo for clientsVoice of the clients and sales back to Product and Engineering teams to ensure feedback is captured and initiatives are executed Desired Skills and Attributes Demonstrated work ethic and capability to be self-starterDemonstrated experience working with top tier clients in understanding their businesses and crafting technical solutionsStrong CRM and marketing automation domain expertise, preferably within the life sciences industryTechnical experience, especially with SFDC and Salesforce Marketing CloudOutstanding communication skills, particularly in conveying technical concepts in a manner that is easy for clients and non-technical partners to understandExcellent quantitative skills and comfort with data exploration toolsDemonstrated experience in owning projects end to end that involves coordinating many resources and teamsExcellent organizational skills and attention to detailExcellent troubleshooting, analytical and problem-solving abilities with a tenacious commitment to finding the root cause of issuesAbility to work under intense pressure and multitask in a fast-paced start-up environmentAbility to energize and lead a team of partner engineers Our ideal candidate will have: Typically requires a minimum of 3 years of related experience with a Bachelor's degree We know that meaningful results require not only the right approach but also the right people.
KG sucht in eine/n Junior Specialist, Technology & Engineering Support (ID-Nummer: 13687267)
About us Your Contribution Support sample build execution by working closely with Project Management, Planners, Production, Product & Process Development, Failure Analysis, and Quality teams.Manage smooth shift‑to‑shift operations and execute daily production plans.Support engineering and maintenance work to prevent downtime and keep production running smoothly.
#Health: Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off.
Wir sind das größte privatwirtschaftlich organisierte IT-Personaldienstleistungsunternehmen in Deutschland und haben für jede Karrierestufe das passende Angebot – egal ob Sie an Vakanzen in agilen KMUs oder starken DAX-Konzernen interessiert sind. Wir beherrschen die komplette IT-Klaviatur von Support bis zur Softwarearchitektur oder Digitalisierung – dank unseres umfangreichen Portfolios ist für jeden etwas dabei. So konnten wir in den vergangenen Jahrzehnten im Rahmen einer Life-Long-Partnerschaft unzählige Fach- und Führungskräfte aus der IT dabei unterstützen, die Weichen für eine erfolgreiche Karriere zu stellen.
#Health : Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off.
Job description / Your role: Take full responsibility for the development of our cybertronic products, typically comprising one or more electric actuators, electronics, mechanical structures, software, and harnesses Supervise and coordinate all engineering activities required for product development, qualification, and industrial manufacturing Lead system engineering efforts for integrated mechanism products, ensuring performance and compliance across subsystems Define and manage system-level performance budgets (e.g. mass, power, thermal) Prepare comprehensive technical documentation, including design descriptions, development schedules, and test specifications Support product testing and qualification processes from prototype to flight-ready hardware Contribute to the Simultaneous Engineering process by collaborating with industrial process engineering teams to scale production Qualification Checklist: University degree (or equivalent) in engineering, aerospace, mechatronics, or a related technical field Professional experience in mechanism or actuator development Industry experience in the space sector, particularly with space mechanisms and electromechanical actuators Proficiency in working with technical requirements, including authoring, reviewing, and interpreting specifications Strong conceptual thinking and analytical problem-solving skills Ability to work effectively in multidisciplinary teams Fluency in English (written and spoken) Bonus Qualifications: Familiarity with numerical engineering tools used for structural, thermal, or motion analysis Initial experience in technical leadership or coordination roles Knowledge of material selection and manufacturing processes suitable for space applications Profound understanding of the full engineering workflow required to design, develop, and qualify space-grade actuators and electronics Extensive professional experience in mechanism or actuator development Benefits: Join an innovative space-tech start-up with real impact on strategy and growth Collaborate globally and work hands-on with cutting-edge research and technology Enjoy a flexible, agile work environment with 30 days of vacation and remote work options Access top industry events, continuous learning, and professional development Benefit from relocation assistance to support your move, if requiredBe part of a supportive team with room to grow as we scale together Ihr Ansprechpartner Dr.
#Health: Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off.
Wir sind das größte privatwirtschaftlich organisierte IT-Personaldienstleistungsunternehmen in Deutschland und haben für jede Karrierestufe das passende Angebot – egal ob Sie an Vakanzen in agilen KMUs oder starken DAX-Konzernen interessiert sind. Wir beherrschen die komplette IT-Klaviatur von Support bis zur Softwarearchitektur oder Digitalisierung – dank unseres umfangreichen Portfolios ist für jeden etwas dabei. So konnten wir in den vergangenen Jahrzehnten im Rahmen einer Life-Long-Partnerschaft unzählige Fach- und Führungskräfte aus der IT dabei unterstützen, die Weichen für eine erfolgreiche Karriere zu stellen.
#Health : Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off.
Wir sind das größte privatwirtschaftlich organisierte IT-Personaldienstleistungsunternehmen in Deutschland und haben für jede Karrierestufe das passende Angebot – egal ob Sie an Vakanzen in agilen KMUs oder starken DAX-Konzernen interessiert sind. Wir beherrschen die komplette IT-Klaviatur von Support bis zur Softwarearchitektur oder Digitalisierung – dank unseres umfangreichen Portfolios ist für jeden etwas dabei. So konnten wir in den vergangenen Jahrzehnten im Rahmen einer Life-Long-Partnerschaft unzählige Fach- und Führungskräfte aus der IT dabei unterstützen, die Weichen für eine erfolgreiche Karriere zu stellen.
The role ensures that customer processes, data formats, and quality requirements are correctly understood, translated, and implemented in the map handling standard software or related solutions that support semiconductor manufacturing from wafer test through assembly and final test. The professional possesses in depth knowledge of the critical stages of semiconductor manufacturing, with a strong focus on wafer test and chip assembly, and maintains a high level understanding of adjacent process stages, including front end wafer fabrication and final test.Degree in Computer Science, Software Engineering, Electrical Engineering or comparable technical fieldStrong IT / software background with understanding of software architecture, data models and interfaces, system integration, industrial software solutions ideally with a background in manufacturing IT or MES environmentsExperience in semiconductor manufacturing, preferably in Wafer Test / Wafer Sort, Assembly, Final TestSolid knowledge of semiconductor data formats and standards such as SEMI E142, SECS/GEM (E5), E183, G85, STDFAbility to analyze complex technical data flows and translate them into software requirementsExperience working at the interface between customers, engineers and software development teamsStrong analytical and structured communication skillsFluent English required, German skills are a plus Gesundheitsmaßnahmen Mitarbeiterrabatte Aus- und Weiterbildung Betriebliche Altersvorsorge Mitarbeiterevents Unbefristete Arbeitsverträge Workation Flache Hierarchien und kurze Kommunikationswege 30 Tage Urlaub sowie anlassbezogener Sonderurlaub Reduzierte Vollzeit In der znt Zentren für Neue Technologien GmbH in Deutschland sowie in Österreich liegen unsere Vollzeitverträge unter 40 Stunden pro Woche.
Conception: Identifies necessary production processes and capacities.New products and processes: Supports the development department in the construction of new production and construction processes according to lean aspects during the development to ensure an optimized serial production.
#Health: Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off.
#Health: Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off.
Freizeitausgleich Nach Möglichkeit Arbeiten aus dem Homeoffice Individuelle Betreuung durch Ihre/n persönliche/n CENIS AnsprechpartnerIn „MitarbeiterInnen-werben-MitarbeiterInnen-Prämie“ in Höhe von bis zu 1.500 Euro Starten Sie mit uns durch und übernehmen Sie gerne Verantwortung in der unten beschriebenen Position. Unterstützen Sie als Cabin Version Support Engineer (m/w/d) den Bereich Cabin Lining A320 und tragen Sie dazu bei, kundenspezifische Kabinenauslegungen technisch umzusetzen.
#Health : Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off.
#Health : Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off.
Responsibilities: Development, monitoring and improvement of engineering quality processes, methods, procedures and relevant quality KPICoordination, reviewing for consistency and assist in writing of all additional processes, procedures and standards owned by the Design Organisation; particular contribution to definition of engineering standardsDevelopment and monitoring of quality criteria of engineering deliverables, design documents, checklists and similarCreation of interface documents required for control of engineering services suppliers (DOID, DO-DO agreements)Planning and execution of internal and external audits to ensure compliance to the DOH and its Design Management System (Process Audits, Product Audits, engineering services suppliers audits)Contribution, planning and support to audits performed by entities independent/external to the Design Organisation (EASA, LBA, HISM)Support of root cause analysis for internal and external engineering quality issuesActive participation in continuous improvement processes and lessons learnedCreation and coordination of Supplier Quality Control Plans, including management of alternativesSupport Supply Chain Quality with audits of manufacturing suppliersContribution to Aircraft Program Milestones Development GatesSupport of risk management activitiesPlanning and execution of training sessions on quality tools, practices and proceduresSupport to engineering trainings Requirements: Good understanding of quality principlesGood understanding of engineering quality aspects of an aircraft OEMPreferably Engineering degree (BA Eng/Sc) in aeronautics / aviation or mechanical or quality degree> 3 year of professional expertise in aircraft industry or in relevant adjacent fieldBasic knowledge of airframe certification requirements, design criteria, materials, methods and toolsNew aircraft development experience would be a plusAbility to prioritise, manage and execute multiple simultaneous tasks What we offer: Future prospects in an innovative, growing, and agile companyAn exciting work environment with diverse career opportunitiesA tariff/above-tariff salaryFlexible working hours and the option for remote work30 vacation days per year and special leave for special occasions upon employment at Xtended EngineeringBonus programs for referrals and employee recruitmentTeam events Xtended Engineering GmbH bringt qualifizierte Ingenieure mit Unternehmen aus der Industrie und Wirtschaft zusammen.
Responsible for supplier audits and assists with Factory Acceptance Testing (when required) Develops detailed knowledge of technical requirements, machines / systems / systems and trades in filling and packaging systems for glass, PET, cans and kegs Application of a preferred OEM portfolio of product groups, approved suppliers and approved products (range and scope of equipment) Assist to establish mechanical and electrical interface and signal exchange documents for seamless integration with KHS line equipment (signal exchange, MES, REDIS) Assures OEM suppliers provide KHS engineering with supplier machine envelope dimensions to support line layouts, include media connection and consumption data (Total Cost of Ownership) Assures OEM suppliers provide machinery documentation Creation of technical specifications and product configurations in close cooperation with KHS engineering and technical departments Support offer management in the technical analysis / evaluation of customer offers and specifications with operational, performance specifications to improve the supplier quoting process and to minimize cost variables (technical risk assessment) Your Qualifications A bachelor’s degree in business, management, supply chain, engineering or similar discipline preferred Five years of experience in purchasing in a manufacturing environment involving machine components Two years purchasing components for KHS machines preferred Ability to synthesize data from manufacturing requisitions and procure the materials needed at price/quality standards in the shortest time frame.
Responsible for supplier audits and assists with Factory Acceptance Testing (when required) Develops detailed knowledge of technical requirements, machines / systems / systems and trades in filling and packaging systems for glass, PET, cans and kegs Application of a preferred OEM portfolio of product groups, approved suppliers and approved products (range and scope of equipment) Assist to establish mechanical and electrical interface and signal exchange documents for seamless integration with KHS line equipment (signal exchange, MES, REDIS) Assures OEM suppliers provide KHS engineering with supplier machine envelope dimensions to support line layouts, include media connection and consumption data (Total Cost of Ownership) Assures OEM suppliers provide machinery documentation Creation of technical specifications and product configurations in close cooperation with KHS engineering and technical departments Support offer management in the technical analysis / evaluation of customer offers and specifications with operational, performance specifications to improve the supplier quoting process and to minimize cost variables (technical risk assessment) Your Qualifications A bachelor’s degree in business, management, supply chain, engineering or similar discipline preferred Five years of experience in purchasing in a manufacturing environment involving machine components Two years purchasing components for KHS machines preferred Ability to synthesize data from manufacturing requisitions and procure the materials needed at price/quality standards in the shortest time frame.
Our team consists of experts from a wide range of fields: Whether fashion, marketing, business, or tech—we are united by a passion for what we do. We motivate and support each other, share our know-how, and are open to different opinions and new ideas. We look forward to receiving your application—preferably online via our application portal.
KG sucht in eine/n Senior CAD Administrator (m/w/d) NX – Schiffbau & Engineering Support (ID-Nummer: 13721202)
Als mittelständisches Familienunternehmen achten wir dabei sehr auf gegenseitige Wertschätzung und ein produktives, vertrauensvolles Arbeitsklima. We are looking for you to support our MES consulting team. In this position for engaged, dynamic young professionals, you will gain experience in the implementation of MES solutions and aquire comprehensive knowledge to become an independent consultant for our MES solutions.Successfully completed studies, ideally with a focus on business informatics, manufacturing or business administration, alternatively comparable practical experienceYou enjoy solution-oriented work and consulting.
Job description / Your role: Take full ownership for the mechanical and thermal design of LEOspace products Supervise and coordinate all related engineering activities, including mechanical design, structural analysis, thermal design, and thermal analysis Lead and support the mechanical and thermal testing and qualification of space hardware Prepare comprehensive technical documentation, including design descriptions, development schedules, and test definitions Conduct preliminary assessments of mechanical and thermal robustness within an agile development framework Support system-level testing and qualification processes Contribute to our Simultaneous Engineering approach by collaborating with industrial process engineering teams to scale the production of mechanical and thermal systems Qualification Checklist: University degree (or equivalent) in engineering, aerospace, or a related technical field Experience in the space industry, with a focus on mechanical and thermal system design Demonstrated expertise in mechanical and/or thermal analysis, with knowledge of industry best practices Familiarity with material and process selection for space applications Strong teamwork and collaboration skills Fluency in English (written and spoken) Bonus Qualifications: Strong conceptual thinking and problem-solving skills Practical experience with numerical engineering tools for mechanical and thermal analysis in space systems Initial experience in leadership or project coordination roles Benefits: Join an innovative space-tech start-up with real impact on strategy and growth Collaborate globally and work hands-on with cutting-edge research and technology Enjoy a flexible, agile work environment with 30 days of vacation and remote work options Access top industry events, continuous learning, and professional development Benefit from relocation assistance to support your move, if required Ihr Ansprechpartner Dr.
Create and maintain supply chain records in our supplier qualification systemAssess all material related changes (vendor or site initiated) and drive quality change control where neededSupport supplier qualification activities, request supplier audits for new partnersBuild an excellent relationship with suppliers of assigned categories to ensure value is created and delivered for the siteCreate material specifications as part of the material qualification activities to support material releasesCoordinate material release schedule to ensure on time material availability for productionCollaborate with internal and external stakeholders (tech transfer, procurement, manufacturing) for material identification and supplier selectionEnsure material is sourced/implemented with the required quality grades for clinical manufacturing / Ensure purchase orders are placed in line with lead times to meet manufacturing schedules / Ensure material planning processes meet schedule need as well as safety, quality, and cost metricsContribute to define a standardized material platforSupport supply chain team on quality and compliance related issues through investigations, change controls, quality risk assessments etc.
</li> <li>Coordinate closely with flight test, instrumentation, stress, aerodynamics, manufacturing, and maintenance teams.</li> <li>Support aircraft modification embodiment, ground testing, and flight test operations, including on-site engineering support and troubleshooting.
Your tasks Design, develop, and implement control system software for industrial automation projects Program PLCs (Programmable Logic Controllers), HMIs (Human-Machine Interfaces), SCADA (Supervisory Control and Data Acquisition) systems, and other control devicesCollaborate with engineering teams to define system requirements and specificationsPerform system integration, testing, and troubleshooting to ensure optimal performance and reliabilityProvide technical support and assistance during installation, commissioning, and maintenance phasesStay current with emerging technologies and industry trends to drive continuous improvement and innovation Your profile Bachelors degree or equivalent in Electrical Engineering, Computer Engineering, Software Engineering or related fieldProven experience in programming and configuring PLCs, preferable Siemens SIMATICProficiency in programming languages commonly used in industrial automation, such as ladder logic, structured text, and function block diagramFamiliarity with HMI or SCADA software, such as WinCC, Zenon or InTouch.Strong problem-solving skills and attention to detailExcellent communication and interpersonal abilitiesAbility to work independently and as part of a team in a fast-paced environment Additional information Competitive salary commensurate with experience Comprehensive benefits package, retirement plans, and paid time offOpportunities for professional development and advancementCollaborative and inclusive work environmentExposure to diverse projects and industries
Within Construction & Property, we recruit executives and specialists in the construction and real estate industry. We support you and our customers in all areas of structural and civil engineering, facility management, large-scale industrial construction, technical building equipment and real estate management.
. • Stay updated on industry trends and advancements in SAP S4 PP/DS to provide innovative solutions to our manufacturing challenges. • Support the integration of planning solutions with other SAP modules and systems as needed. • Bachelor’s degree in Engineering, Supply Chain Management, Information Technology, or a related field. • Long years of experience in SAP S4 PP/DS, with a strong understanding of manufacturing processes, deep knowledge of SAP PP, MRP, and advanced planning • Proven experience in project management, with a track record of successfully leading projects from inception to completion. • Strong analytical and problem-solving skills, with the ability to think critically and strategically. • Excellent communication and interpersonal skills, with the ability to work collaboratively across teams. • Familiarity with Agile methodologies is an advantage. ##5,472000004
We are currently looking for a skilled Teamlead Engineering (m/w/d) with a passion to assume leadership responsibilities to support us in building the fastest & most intuitive shopping app using a brand-new tech stack onsite in Hamburg or Berlin! The App & Web Team constantly improves the App, Mobile Website and Desktop Website.
With an apprenticeship or dual study program at TRUMPF, you can help shape the future – yours and ours! You can always count on our full support and the stability we offer as an international, family-owned business. Exciting tasks and projects await you in one of our 71 subsidiaries around the world, along with attractive training compensation.
With an apprenticeship or dual study program at TRUMPF, you can help shape the future – yours and ours! You can always count on our full support and the stability we offer as an international, family-owned business. Exciting tasks and projects await you in one of our 71 subsidiaries around the world, along with attractive training compensation.
Als mittelständisches Familienunternehmen achten wir dabei sehr auf gegenseitige Wertschätzung und ein produktives, vertrauensvolles Arbeitsklima. You will support our Director of Portfolio/Product Management in all operational and strategic tasks. In doing so, you will act as the central interface between product management, manufacturing, IT, and our electronics manufacturing customers.Training or studies in electronics, electrical engineering, or a comparable technical fieldExperience in electronics manufacturing (e.g., SMT, THT, testing processes, etc.) or related areas (product management, work preparation, production)Ideally, you will have knowledge in one of the following areas: software (Valor Process Preparation, Valor Bom Connector) or machines (e.g., ASM, Fuji, Juki, Panasonic, Mycronics, etc.)IT affinity and knowledge of Windows networks, TCP/IP, databases (SQL, PostgreSQL, MS SQL)Good communication skills and technical understanding in interaction with various departmentsBusiness fluent in written and spoken German and EnglishAs a service-oriented company, creativity and commitment on the part of our employees are particularly important.
About us Your Contribution Develop new metrology methods and solutions to support the development and manufacturing of optical components Optimize measurement algorithms and automated data collection and data processingSpecify new equipment and drive equipment development together with equipment supplierIn charge to characterize process and product performance The new metrology methods need to be developed during the product development phase, set up during the NPI phase and finally transferred to high volume manufacturing; Responsible for metrology equipment buy off at vendor site and at manufacturing site including all needed documentations.
Herzlich willkommen bei der DEKRA Arbeit. Werden Sie Teil unseres Teams als Technical Shopfloor Support (m/w/d) bei unserem Kunden in Nordenham in Vollzeit. Ihre Aufgaben: Unterstützung der Fertigung bei technischen Problemen auf dem Shopfloor Umsetzung und Koordination von kontinuierlichen Verbesserungsprozessen (KVP) Erstellung von KPIs, Paretoanalysen und Berichten zur Prozessoptimierung Erstellung und Durchführung von Schulungen für Fertigungsmitarbeiter Organisation von Werkzeugen, Vorrichtungen, Wartung und außerordentlichen Arbeiten zur Sicherstellung des Produktionsablaufs Schnittstellenkoordination zwischen Fertigung, Meister/AV und Konstruktion Ihr Profil: Abgeschlossenes Studium Maschinenbau oder vergleichbare Qualifikation (Techniker/Fachwirt) Oder technisches Studium Erfahrung in Arbeitsvorbereitung, Fertigung/Produktion und Manufacturing Engineering Fachkenntnisse in der Einzelteilfertigung Vertiefte Kenntnisse in SAP/R3, mind. erste Kenntnisse in Catia V5 Sehr gute Deutsch- und Englischkenntnisse Was wir Ihnen bieten: Einen sicheren Arbeitsplatz in einer zukunftsorientierten Wachstumsbranche Ein modernes und abwechslungsreiches Arbeitsumfeld Persönliche und fachliche Entwicklungsmöglichkeiten Einen unbefristeten Arbeitsvertrag mit einer leistungsgerechten Vergütung Ihr Weg zu uns: Falls Sie sich direkt bewerben wollen, so können Sie uns gerne Ihren Lebenslauf per E-mail senden oder uns Ihre Daten über die angebotene online-Bewerbung zukommen lassen.
Als mittelständisches Familienunternehmen achten wir dabei sehr auf gegenseitige Wertschätzung und ein produktives, vertrauensvolles Arbeitsklima. We are looking for you to support our MES consulting team. In this position, you will be an integral part of our project teams and jointly responsible for the successful design and implementation of our MES solutions at our customers' sites.Successfully completed studies, ideally with a focus on business informatics, manufacturing or business administration, alternatively comparable practical experienceYou enjoy solution-oriented work and consulting.
Als mittelständisches Familienunternehmen achten wir dabei sehr auf gegenseitige Wertschätzung und ein produktives, vertrauensvolles Arbeitsklima. We are looking for you to support us in the design and development of business-critical IT solutions in the production environment.Ideally first experience in programming languages (Java, C#) and databases (SQL, Oracle)Interest in the area of manufacturing IT as well as in manufacturing processes and topics in the environment of MES & automationAnalytical thinking and quick comprehensionAbility to work in a team, reliability, engagement, willingness to learn and flexibilityConfident communication in German and EnglishAs a service-oriented company, creativity and engagement of the employees are particularly important.
We maintain close relationships with customers across all industries and therefore can provide engineering specialists with exciting projects and attractive job opportunities, drawing on your personal interests and experience. As your professional companion, we support you throughout the entire process, from the first contact to the first day on your new job – all this completely free of charge.